RAB65

The RAB65 was developed for kits in the late 1990s and has been used in may others since. Not the cheapest solution but if you want the ultimate in looks and performance then it can't be beaten.

Our JC60FC range of filters will fit straight into these air boxes.

View Dealers

1452591868-rab65 carbon airbox up to 300 outlet.jpg
Manufactured in the United Kingdom
Manufactured in the United Kingdom
Measurements

A - (Length) Measurement taken from airbox inlet (C), to filter spinning outlet (D).
Rebated ARAB Spinning reduces length by approx. 20mm

B - (Width) Measurement taken at widest point of filter lid spinning.
Do not measure from screw to screw.

C - Inlet (Dirty air in) measurement taken as internal diameter.
See table for duct sizing guide.

D - Outlet (Clean air out) measurement taken as internal diameter, and relates to ARAB spinning used.
All dimensions are in (mm)

RAB65 Size Options
Part No. A (Length) B (Width) C (Inlet) D (Outlet ID / OD) BHP
RAB65 w/ JC60/58FC 354 163 99 58 / 61 200
RAB65 w/ JC60/60FC 373 163 99 60 / 63 220
RAB65 w/ JC60/63FC 373 163 99 63 / 66 240
RAB65 w/ JC60/67FC 375 163 99 67 / 70 270
RAB65 w/ JC60/70FC 375 163 99 70 / 73 290
RAB65 w/ JC60/73FC 371 163 99 73 / 76 300
RAB65 w/ JC60/78FC 365 163 99 78 / 81 310
RAB65 w/ JC60/84FC 367 163 99 84 / 87 330
RAB65